+++ /dev/null
-# -----------------------------
-# PostgreSQL configuration file
-# -----------------------------
-#
-# This file consists of lines of the form:
-#
-# name = value
-#
-# (The "=" is optional.) Whitespace may be used. Comments are introduced with
-# "#" anywhere on a line. The complete list of parameter names and allowed
-# values can be found in the PostgreSQL documentation.
-#
-# The commented-out settings shown in this file represent the default values.
-# Re-commenting a setting is NOT sufficient to revert it to the default value;
-# you need to reload the server.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal. If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, run "pg_ctl reload", or execute
-# "SELECT pg_reload_conf()". Some parameters, which are marked below,
-# require a server shutdown and restart to take effect.
-#
-# Any parameter can also be given as a command-line option to the server, e.g.,
-# "postgres -c log_connections=on". Some parameters can be changed at run time
-# with the "SET" SQL command.
-#
-# Memory units: B = bytes Time units: us = microseconds
-# kB = kilobytes ms = milliseconds
-# MB = megabytes s = seconds
-# GB = gigabytes min = minutes
-# TB = terabytes h = hours
-# d = days
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-# The default values of these variables are driven from the -D command-line
-# option or PGDATA environment variable, represented here as ConfigDir.
-
-data_directory = '/var/lib/postgresql/12/main' # use data in another directory
- # (change requires restart)
-hba_file = '/etc/postgresql/12/main/pg_hba.conf' # host-based authentication file
- # (change requires restart)
-ident_file = '/etc/postgresql/12/main/pg_ident.conf' # ident configuration file
- # (change requires restart)
-
-# If external_pid_file is not explicitly set, no extra PID file is written.
-external_pid_file = '/var/run/postgresql/12-main.pid' # write an extra PID file
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS AND AUTHENTICATION
-#------------------------------------------------------------------------------
-
-# - Connection Settings -
-
-#listen_addresses = 'localhost' # what IP address(es) to listen on;
- # comma-separated list of addresses;
- # defaults to 'localhost'; use '*' for all
- # (change requires restart)
-port = 5432 # (change requires restart)
-max_connections = 100 # (change requires restart)
-#superuser_reserved_connections = 3 # (change requires restart)
-unix_socket_directories = '/var/run/postgresql' # comma-separated list of directories
- # (change requires restart)
-#unix_socket_group = '' # (change requires restart)
-#unix_socket_permissions = 0777 # begin with 0 to use octal notation
- # (change requires restart)
-#bonjour = off # advertise server via Bonjour
- # (change requires restart)
-#bonjour_name = '' # defaults to the computer name
- # (change requires restart)
-
-# - TCP settings -
-# see "man 7 tcp" for details
-
-#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
- # 0 selects the system default
-#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
- # 0 selects the system default
-#tcp_keepalives_count = 0 # TCP_KEEPCNT;
- # 0 selects the system default
-#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds;
- # 0 selects the system default
-
-# - Authentication -
-
-#authentication_timeout = 1min # 1s-600s
-#password_encryption = md5 # md5 or scram-sha-256
-#db_user_namespace = off
-
-# GSSAPI using Kerberos
-#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab'
-#krb_caseins_users = off
-
-# - SSL -
-
-ssl = on
-#ssl_ca_file = ''
-ssl_cert_file = '/etc/ssl/certs/ssl-cert-snakeoil.pem'
-#ssl_crl_file = ''
-ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key'
-#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
-#ssl_prefer_server_ciphers = on
-#ssl_ecdh_curve = 'prime256v1'
-#ssl_min_protocol_version = 'TLSv1'
-#ssl_max_protocol_version = ''
-#ssl_dh_params_file = ''
-#ssl_passphrase_command = ''
-#ssl_passphrase_command_supports_reload = off
-
-
-#------------------------------------------------------------------------------
-# RESOURCE USAGE (except WAL)
-#------------------------------------------------------------------------------
-
-# - Memory -
-
-shared_buffers = 128MB # min 128kB
- # (change requires restart)
-#huge_pages = try # on, off, or try
- # (change requires restart)
-#temp_buffers = 8MB # min 800kB
-#max_prepared_transactions = 0 # zero disables the feature
- # (change requires restart)
-# Caution: it is not advisable to set max_prepared_transactions nonzero unless
-# you actively intend to use prepared transactions.
-#work_mem = 4MB # min 64kB
-#maintenance_work_mem = 64MB # min 1MB
-#autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem
-#max_stack_depth = 2MB # min 100kB
-#shared_memory_type = mmap # the default is the first option
- # supported by the operating system:
- # mmap
- # sysv
- # windows
- # (change requires restart)
-dynamic_shared_memory_type = posix # the default is the first option
- # supported by the operating system:
- # posix
- # sysv
- # windows
- # mmap
- # (change requires restart)
-
-# - Disk -
-
-#temp_file_limit = -1 # limits per-process temp file space
- # in kB, or -1 for no limit
-
-# - Kernel Resources -
-
-#max_files_per_process = 1000 # min 25
- # (change requires restart)
-
-# - Cost-Based Vacuum Delay -
-
-#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables)
-#vacuum_cost_page_hit = 1 # 0-10000 credits
-#vacuum_cost_page_miss = 10 # 0-10000 credits
-#vacuum_cost_page_dirty = 20 # 0-10000 credits
-#vacuum_cost_limit = 200 # 1-10000 credits
-
-# - Background Writer -
-
-#bgwriter_delay = 200ms # 10-10000ms between rounds
-#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables
-#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
-#bgwriter_flush_after = 512kB # measured in pages, 0 disables
-
-# - Asynchronous Behavior -
-
-#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
-#max_worker_processes = 8 # (change requires restart)
-#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers
-#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
-#parallel_leader_participation = on
-#max_parallel_workers = 8 # maximum number of max_worker_processes that
- # can be used in parallel operations
-#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
- # (change requires restart)
-#backend_flush_after = 0 # measured in pages, 0 disables
-
-
-#------------------------------------------------------------------------------
-# WRITE-AHEAD LOG
-#------------------------------------------------------------------------------
-
-# - Settings -
-
-#wal_level = replica # minimal, replica, or logical
- # (change requires restart)
-#fsync = on # flush data to disk for crash safety
- # (turning this off can cause
- # unrecoverable data corruption)
-#synchronous_commit = on # synchronization level;
- # off, local, remote_write, remote_apply, or on
-#wal_sync_method = fsync # the default is the first option
- # supported by the operating system:
- # open_datasync
- # fdatasync (default on Linux and FreeBSD)
- # fsync
- # fsync_writethrough
- # open_sync
-#full_page_writes = on # recover from partial page writes
-#wal_compression = off # enable compression of full-page writes
-#wal_log_hints = off # also do full page writes of non-critical updates
- # (change requires restart)
-#wal_init_zero = on # zero-fill new WAL files
-#wal_recycle = on # recycle WAL files
-#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
- # (change requires restart)
-#wal_writer_delay = 200ms # 1-10000 milliseconds
-#wal_writer_flush_after = 1MB # measured in pages, 0 disables
-
-#commit_delay = 0 # range 0-100000, in microseconds
-#commit_siblings = 5 # range 1-1000
-
-# - Checkpoints -
-
-#checkpoint_timeout = 5min # range 30s-1d
-max_wal_size = 1GB
-min_wal_size = 80MB
-#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
-#checkpoint_flush_after = 256kB # measured in pages, 0 disables
-#checkpoint_warning = 30s # 0 disables
-
-# - Archiving -
-
-#archive_mode = off # enables archiving; off, on, or always
- # (change requires restart)
-#archive_command = '' # command to use to archive a logfile segment
- # placeholders: %p = path of file to archive
- # %f = file name only
- # e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
-#archive_timeout = 0 # force a logfile segment switch after this
- # number of seconds; 0 disables
-
-# - Archive Recovery -
-
-# These are only used in recovery mode.
-
-#restore_command = '' # command to use to restore an archived logfile segment
- # placeholders: %p = path of file to restore
- # %f = file name only
- # e.g. 'cp /mnt/server/archivedir/%f %p'
- # (change requires restart)
-#archive_cleanup_command = '' # command to execute at every restartpoint
-#recovery_end_command = '' # command to execute at completion of recovery
-
-# - Recovery Target -
-
-# Set these only when performing a targeted recovery.
-
-#recovery_target = '' # 'immediate' to end recovery as soon as a
- # consistent state is reached
- # (change requires restart)
-#recovery_target_name = '' # the named restore point to which recovery will proceed
- # (change requires restart)
-#recovery_target_time = '' # the time stamp up to which recovery will proceed
- # (change requires restart)
-#recovery_target_xid = '' # the transaction ID up to which recovery will proceed
- # (change requires restart)
-#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed
- # (change requires restart)
-#recovery_target_inclusive = on # Specifies whether to stop:
- # just after the specified recovery target (on)
- # just before the recovery target (off)
- # (change requires restart)
-#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID
- # (change requires restart)
-#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown'
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# REPLICATION
-#------------------------------------------------------------------------------
-
-# - Sending Servers -
-
-# Set these on the master and on any standby that will send replication data.
-
-#max_wal_senders = 10 # max number of walsender processes
- # (change requires restart)
-#wal_keep_segments = 0 # in logfile segments; 0 disables
-#wal_sender_timeout = 60s # in milliseconds; 0 disables
-
-#max_replication_slots = 10 # max number of replication slots
- # (change requires restart)
-#track_commit_timestamp = off # collect timestamp of transaction commit
- # (change requires restart)
-
-# - Master Server -
-
-# These settings are ignored on a standby server.
-
-#synchronous_standby_names = '' # standby servers that provide sync rep
- # method to choose sync standbys, number of sync standbys,
- # and comma-separated list of application_name
- # from standby(s); '*' = all
-#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
-
-# - Standby Servers -
-
-# These settings are ignored on a master server.
-
-#primary_conninfo = '' # connection string to sending server
- # (change requires restart)
-#primary_slot_name = '' # replication slot on sending server
- # (change requires restart)
-#promote_trigger_file = '' # file name whose presence ends recovery
-#hot_standby = on # "off" disallows queries during recovery
- # (change requires restart)
-#max_standby_archive_delay = 30s # max delay before canceling queries
- # when reading WAL from archive;
- # -1 allows indefinite delay
-#max_standby_streaming_delay = 30s # max delay before canceling queries
- # when reading streaming WAL;
- # -1 allows indefinite delay
-#wal_receiver_status_interval = 10s # send replies at least this often
- # 0 disables
-#hot_standby_feedback = off # send info from standby to prevent
- # query conflicts
-#wal_receiver_timeout = 60s # time that receiver waits for
- # communication from master
- # in milliseconds; 0 disables
-#wal_retrieve_retry_interval = 5s # time to wait before retrying to
- # retrieve WAL after a failed attempt
-#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery
-
-# - Subscribers -
-
-# These settings are ignored on a publisher.
-
-#max_logical_replication_workers = 4 # taken from max_worker_processes
- # (change requires restart)
-#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
-
-
-#------------------------------------------------------------------------------
-# QUERY TUNING
-#------------------------------------------------------------------------------
-
-# - Planner Method Configuration -
-
-#enable_bitmapscan = on
-#enable_hashagg = on
-#enable_hashjoin = on
-#enable_indexscan = on
-#enable_indexonlyscan = on
-#enable_material = on
-#enable_mergejoin = on
-#enable_nestloop = on
-#enable_parallel_append = on
-#enable_seqscan = on
-#enable_sort = on
-#enable_tidscan = on
-#enable_partitionwise_join = off
-#enable_partitionwise_aggregate = off
-#enable_parallel_hash = on
-#enable_partition_pruning = on
-
-# - Planner Cost Constants -
-
-#seq_page_cost = 1.0 # measured on an arbitrary scale
-#random_page_cost = 4.0 # same scale as above
-#cpu_tuple_cost = 0.01 # same scale as above
-#cpu_index_tuple_cost = 0.005 # same scale as above
-#cpu_operator_cost = 0.0025 # same scale as above
-#parallel_tuple_cost = 0.1 # same scale as above
-#parallel_setup_cost = 1000.0 # same scale as above
-
-#jit_above_cost = 100000 # perform JIT compilation if available
- # and query more expensive than this;
- # -1 disables
-#jit_inline_above_cost = 500000 # inline small functions if query is
- # more expensive than this; -1 disables
-#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if
- # query is more expensive than this;
- # -1 disables
-
-#min_parallel_table_scan_size = 8MB
-#min_parallel_index_scan_size = 512kB
-#effective_cache_size = 4GB
-
-# - Genetic Query Optimizer -
-
-#geqo = on
-#geqo_threshold = 12
-#geqo_effort = 5 # range 1-10
-#geqo_pool_size = 0 # selects default based on effort
-#geqo_generations = 0 # selects default based on effort
-#geqo_selection_bias = 2.0 # range 1.5-2.0
-#geqo_seed = 0.0 # range 0.0-1.0
-
-# - Other Planner Options -
-
-#default_statistics_target = 100 # range 1-10000
-#constraint_exclusion = partition # on, off, or partition
-#cursor_tuple_fraction = 0.1 # range 0.0-1.0
-#from_collapse_limit = 8
-#join_collapse_limit = 8 # 1 disables collapsing of explicit
- # JOIN clauses
-#force_parallel_mode = off
-#jit = on # allow JIT compilation
-#plan_cache_mode = auto # auto, force_generic_plan or
- # force_custom_plan
-
-
-#------------------------------------------------------------------------------
-# REPORTING AND LOGGING
-#------------------------------------------------------------------------------
-
-# - Where to Log -
-
-#log_destination = 'stderr' # Valid values are combinations of
- # stderr, csvlog, syslog, and eventlog,
- # depending on platform. csvlog
- # requires logging_collector to be on.
-
-# This is used when logging to stderr:
-#logging_collector = off # Enable capturing of stderr and csvlog
- # into log files. Required to be on for
- # csvlogs.
- # (change requires restart)
-
-# These are only used if logging_collector is on:
-#log_directory = 'log' # directory where log files are written,
- # can be absolute or relative to PGDATA
-#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
- # can include strftime() escapes
-#log_file_mode = 0600 # creation mode for log files,
- # begin with 0 to use octal notation
-#log_truncate_on_rotation = off # If on, an existing log file with the
- # same name as the new log file will be
- # truncated rather than appended to.
- # But such truncation only occurs on
- # time-driven rotation, not on restarts
- # or size-driven rotation. Default is
- # off, meaning append to existing files
- # in all cases.
-#log_rotation_age = 1d # Automatic rotation of logfiles will
- # happen after that time. 0 disables.
-#log_rotation_size = 10MB # Automatic rotation of logfiles will
- # happen after that much log output.
- # 0 disables.
-
-# These are relevant when logging to syslog:
-#syslog_facility = 'LOCAL0'
-#syslog_ident = 'postgres'
-#syslog_sequence_numbers = on
-#syslog_split_messages = on
-
-# This is only relevant when logging to eventlog (win32):
-# (change requires restart)
-#event_source = 'PostgreSQL'
-
-# - When to Log -
-
-#log_min_messages = warning # values in order of decreasing detail:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # info
- # notice
- # warning
- # error
- # log
- # fatal
- # panic
-
-#log_min_error_statement = error # values in order of decreasing detail:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # info
- # notice
- # warning
- # error
- # log
- # fatal
- # panic (effectively off)
-
-#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
- # and their durations, > 0 logs only
- # statements running at least this number
- # of milliseconds
-
-#log_transaction_sample_rate = 0.0 # Fraction of transactions whose statements
- # are logged regardless of their duration. 1.0 logs all
- # statements from all transactions, 0.0 never logs.
-
-# - What to Log -
-
-#debug_print_parse = off
-#debug_print_rewritten = off
-#debug_print_plan = off
-#debug_pretty_print = on
-#log_checkpoints = off
-#log_connections = off
-#log_disconnections = off
-#log_duration = off
-#log_error_verbosity = default # terse, default, or verbose messages
-#log_hostname = off
-log_line_prefix = '%m [%p] %q%u@%d ' # special values:
- # %a = application name
- # %u = user name
- # %d = database name
- # %r = remote host and port
- # %h = remote host
- # %p = process ID
- # %t = timestamp without milliseconds
- # %m = timestamp with milliseconds
- # %n = timestamp with milliseconds (as a Unix epoch)
- # %i = command tag
- # %e = SQL state
- # %c = session ID
- # %l = session line number
- # %s = session start timestamp
- # %v = virtual transaction ID
- # %x = transaction ID (0 if none)
- # %q = stop here in non-session
- # processes
- # %% = '%'
- # e.g. '<%u%%%d> '
-#log_lock_waits = off # log lock waits >= deadlock_timeout
-#log_statement = 'none' # none, ddl, mod, all
-#log_replication_commands = off
-#log_temp_files = -1 # log temporary files equal or larger
- # than the specified size in kilobytes;
- # -1 disables, 0 logs all temp files
-log_timezone = 'Etc/UTC'
-
-#------------------------------------------------------------------------------
-# PROCESS TITLE
-#------------------------------------------------------------------------------
-
-cluster_name = '12/main' # added to process titles if nonempty
- # (change requires restart)
-#update_process_title = on
-
-
-#------------------------------------------------------------------------------
-# STATISTICS
-#------------------------------------------------------------------------------
-
-# - Query and Index Statistics Collector -
-
-#track_activities = on
-#track_counts = on
-#track_io_timing = off
-#track_functions = none # none, pl, all
-#track_activity_query_size = 1024 # (change requires restart)
-stats_temp_directory = '/var/run/postgresql/12-main.pg_stat_tmp'
-
-
-# - Monitoring -
-
-#log_parser_stats = off
-#log_planner_stats = off
-#log_executor_stats = off
-#log_statement_stats = off
-
-
-#------------------------------------------------------------------------------
-# AUTOVACUUM
-#------------------------------------------------------------------------------
-
-#autovacuum = on # Enable autovacuum subprocess? 'on'
- # requires track_counts to also be on.
-#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
- # their durations, > 0 logs only
- # actions running at least this number
- # of milliseconds.
-#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
- # (change requires restart)
-#autovacuum_naptime = 1min # time between autovacuum runs
-#autovacuum_vacuum_threshold = 50 # min number of row updates before
- # vacuum
-#autovacuum_analyze_threshold = 50 # min number of row updates before
- # analyze
-#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
-#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
-#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
- # (change requires restart)
-#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age
- # before forced vacuum
- # (change requires restart)
-#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for
- # autovacuum, in milliseconds;
- # -1 means use vacuum_cost_delay
-#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
- # autovacuum, -1 means use
- # vacuum_cost_limit
-
-
-#------------------------------------------------------------------------------
-# CLIENT CONNECTION DEFAULTS
-#------------------------------------------------------------------------------
-
-# - Statement Behavior -
-
-#client_min_messages = notice # values in order of decreasing detail:
- # debug5
- # debug4
- # debug3
- # debug2
- # debug1
- # log
- # notice
- # warning
- # error
-#search_path = '"$user", public' # schema names
-#row_security = on
-#default_tablespace = '' # a tablespace name, '' uses the default
-#temp_tablespaces = '' # a list of tablespace names, '' uses
- # only default tablespace
-#default_table_access_method = 'heap'
-#check_function_bodies = on
-#default_transaction_isolation = 'read committed'
-#default_transaction_read_only = off
-#default_transaction_deferrable = off
-#session_replication_role = 'origin'
-#statement_timeout = 0 # in milliseconds, 0 is disabled
-#lock_timeout = 0 # in milliseconds, 0 is disabled
-#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
-#vacuum_freeze_min_age = 50000000
-#vacuum_freeze_table_age = 150000000
-#vacuum_multixact_freeze_min_age = 5000000
-#vacuum_multixact_freeze_table_age = 150000000
-#vacuum_cleanup_index_scale_factor = 0.1 # fraction of total number of tuples
- # before index cleanup, 0 always performs
- # index cleanup
-#bytea_output = 'hex' # hex, escape
-#xmlbinary = 'base64'
-#xmloption = 'content'
-#gin_fuzzy_search_limit = 0
-#gin_pending_list_limit = 4MB
-
-# - Locale and Formatting -
-
-datestyle = 'iso, mdy'
-#intervalstyle = 'postgres'
-timezone = 'Etc/UTC'
-#timezone_abbreviations = 'Default' # Select the set of available time zone
- # abbreviations. Currently, there are
- # Default
- # Australia (historical usage)
- # India
- # You can create your own file in
- # share/timezonesets/.
-#extra_float_digits = 1 # min -15, max 3; any value >0 actually
- # selects precise output mode
-#client_encoding = sql_ascii # actually, defaults to database
- # encoding
-
-# These settings are initialized by initdb, but they can be changed.
-lc_messages = 'en_US.UTF-8' # locale for system error message
- # strings
-lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
-lc_numeric = 'en_US.UTF-8' # locale for number formatting
-lc_time = 'en_US.UTF-8' # locale for time formatting
-
-# default configuration for text search
-default_text_search_config = 'pg_catalog.english'
-
-# - Shared Library Preloading -
-
-#shared_preload_libraries = '' # (change requires restart)
-#local_preload_libraries = ''
-#session_preload_libraries = ''
-#jit_provider = 'llvmjit' # JIT library to use
-
-# - Other Defaults -
-
-#dynamic_library_path = '$libdir'
-
-
-#------------------------------------------------------------------------------
-# LOCK MANAGEMENT
-#------------------------------------------------------------------------------
-
-#deadlock_timeout = 1s
-#max_locks_per_transaction = 64 # min 10
- # (change requires restart)
-#max_pred_locks_per_transaction = 64 # min 10
- # (change requires restart)
-#max_pred_locks_per_relation = -2 # negative values mean
- # (max_pred_locks_per_transaction
- # / -max_pred_locks_per_relation) - 1
-#max_pred_locks_per_page = 2 # min 0
-
-
-#------------------------------------------------------------------------------
-# VERSION AND PLATFORM COMPATIBILITY
-#------------------------------------------------------------------------------
-
-# - Previous PostgreSQL Versions -
-
-#array_nulls = on
-#backslash_quote = safe_encoding # on, off, or safe_encoding
-#escape_string_warning = on
-#lo_compat_privileges = off
-#operator_precedence_warning = off
-#quote_all_identifiers = off
-#standard_conforming_strings = on
-#synchronize_seqscans = on
-
-# - Other Platforms and Clients -
-
-#transform_null_equals = off
-
-
-#------------------------------------------------------------------------------
-# ERROR HANDLING
-#------------------------------------------------------------------------------
-
-#exit_on_error = off # terminate session on any error?
-#restart_after_crash = on # reinitialize after backend crash?
-#data_sync_retry = off # retry or panic on failure to fsync
- # data?
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONFIG FILE INCLUDES
-#------------------------------------------------------------------------------
-
-# These options allow settings to be loaded from files other than the
-# default postgresql.conf. Note that these are directives, not variable
-# assignments, so they can usefully be given more than once.
-
-include_dir = 'conf.d' # include files ending in '.conf' from
- # a directory, e.g., 'conf.d'
-#include_if_exists = '...' # include file only if it exists
-#include = '...' # include file
-
-
-#------------------------------------------------------------------------------
-# CUSTOMIZED OPTIONS
-#------------------------------------------------------------------------------
-
-# Add settings for extensions here
projects / nutratech / vps-root.git / commitdiff